Description
Clamping Unit NP190 – Indexed Ø190×38 mm/ 7.48″ dia. x 1.50″ high. Wt. 12.84 lbs.
With 4 indexing holes Ø10 mm/ 0.393″ dia., 4x10H7 (/+0.0015) 4 holes at -120, 0, +120 & 180 deg. 12,5mm depth on 175mm dia.
Made of hardened stainless steel, sealed design.
Clamping force 60 kN/ 13,500 lbs. Spring loaded clamping. Released by compressed air min. air pressure 6 bar/ 87 psi.
Air pressure is only required for unclamping.
Only 1 type of clamping stud is required. Available S/S SHCS covers #24164 (50 pcs.)
Downloads:
Clamping Unit NP190 – Indexed